We manufacture with metal wire silicone rubber not only environmental protection, but also has the very strong shielding effect. The product contains many upright metal wire, these metal wire to penetrate artificial rubber flat side and in each square centimeters are in 100 the contact point in.
They often with gasket, strip or chip supply and take the form of back glue, make gasket groove or, in the absence of the aperture, can be firmly in place. If there are available for use of the groove, so the pad shape often have a O the shape of a ring connection, and don't need to back glue. Because this series products of elastomer than their highly wide, so to detail thickness. First of all, to be embedded also long wire. Second, height to width than big (such as: in a suitable slot).
If need to make height than width dimension size (for example, install it into the groove), you can also satisfy the requirements we.
Especially need to pay attention to the design of liner is to ensure that the compression process fixed the lid of the door cannot or distortion. In the block of the liner prevented a compression is very necessary. The material should be compressed to natural height of about 15%. If you have a technology questions, please contact us.
